Charge the battery
Before using the headset, you must charge the battery.
Warning:
Use only chargers approved by Nokia for use with this particular model. The use of any
other types may invalidate any approval or warranty, and may be dangerous. Use of
unapproved chargers may present a risk of fire, explosion, or other hazard.
1 Connect the charger to a wall outlet.
2 Place the headset in the cradle.
3 Connect the charger cable to the charger connector in the cradle. The red charging
indicator light switches off when the battery is fully charged.
4 Disconnect the charger from the cradle, then from the wall outlet.
When you unplug a charger, hold and pull the plug, not the cord.
The fully charged battery has power for up to 2 hours of talk time and up to 35 hours
of standby time. If you keep the headset in the cradle, the standby time is up to 2
months.
3
When the battery charge is low, you hear a voice prompt. In addition, a red indicator
light flashes and the headset beeps every 5 minutes. If you have deactivated voice
prompts, the headset beeps every 5 minutes.
Check the battery charge
With your headset switched on and connected to your phone, press the multifunction
key. A green light indicates a sufficient charge level. If the light is yellow, you may need
to recharge the battery soon. If the light is red, recharge the battery.